Engineered for an evolving planet™
 
 

 

TECHNICAL DATA SHEET

  
 

 

BX 2000

  
 

 

INT/EXT 100% ACRYLIC ALL SURFACE STAIN BLOCKING PRIMER

 
 

 

PRODUCT:

 

BX 2000
INTERIOR/EXTERIOR 100% ACRYLIC ALL SURFACE PRIMER

 
 

 

DESCRIPTION:

 

Betanix® Designer Series quick-drying 100% acrylic multi surface stain blocking primer is
designed to be resistant to mildew, corrosion, and tannin staining. Formulated with excellent
Anti-Mold™ and Anti-Fungus™ properties to protect the paint film only, for use over
bleeding-type exterior treated wood surfaces such as cedar, redwood and fir. May also be used
as a fast-drying primer for water and oil base paints, or as a primer on masonry and clean, aged,
galvanized metal.




  
 

 

PRODUCT CHARACTERISTICS / PERFORMANCE:

  
  Vehicle Type: 100% Acrylic Emulsion  
  Weight per gallon (lb.) 10.66  
  Viscosity (KU) 90-95  
  Solids by weight: 57.55%  
  Solids by volume: 44.46%  
  Maximum VOC (g/l): 350  
  Typical Thickness - Wet (mils) 3.4  
  Dry (mils)  1.5  
  Typical Coverage (sq. ft./gal) 300-400  
  Dry Time (77°F. / 55% R H)  
  Set to Touch (hr.) 1/2-1  
  Recoat (hr.) 4  
  Through Dry (hr.) 18  
  Gloss (60° angle) 3-5  
   
  PERFORMANCE TESTING RESULTS:  
           
  TEST RESULTS  
           
  Hide
(ASTM D 2805)
95.19  
           
    Sag Resistance
(ASTM D 4400)
  12 +  
           
  Adhesion (Tape Test) **
(ASTM D 3395)
5B  
           
  Freeze-Thaw Stability
(ASTM D 2243)
Pass
(3 cycles)
 
           
  Heat Stability
(ASTM D 1849)
Pass
(No change 3 week @ 120°F)
  
       
    Enamel Hold Out)
Excellent
  
       
    Stain Blocking Excellent
(288 Hours in QCT Cabinet)
  
       
  * On a scale from 1-10 (10 = Best, 0 = Poor).  
  ** On a scale from 0B-5B (5B = 0% area removed, 0B = Greater than 65% area is removed).  
           
           
           
  Note: To the best or our knowledge, the information contained herein is accurate. However, Betanix® assumes no liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of the suitability of any information or material for the use contemplated, the manner of use and whether there is any infringement of patents is the sole responsibility of the user. Additional information may be obtained thorough your local sales representative or the Betanix Sales Office.  
 
(back)
  
Owner Of Intellectual Properties © 1995-2011 Beta Technology Licenses UK Ltd., Betanix® UK Ltd. All Rights Reserved.
London   •  New York  •  Luxembourg