Engineered for an evolving planet™
 
 

 

TECHNICAL DATA SHEET

  
 

 

BX 1000

  
 

 

INTERIOR WALL PRIMER-SEALER

  
 

 

PRODUCT:

 

BX 1000
INTERIOR WALL PRIMER-SEALER

  
 

 

DESCRIPTION:

 

Betanix® Designer Series premium quality wall primer-sealer is a high hide primer for new interior
drywall, plaster, concrete, brick and acoustical tile. May be used as prime coat both before and
after texturing. It is designed to provide a uniform base suitable for any type of finish coat, and
has excellent enamel holdout and excellent Anti-Mold™, and Anti-Fungus™ properties to protect
the paint film only, when used underenamel finish coats.





  
 

 

PRODUCT CHARACTERISTICS / PERFORMANCE:

  
  Vehicle Type: Vinyl Acrylic Emulsion  
  Weight per gallon (lb.) 11.01  
  Viscosity (KU) 90-95  
  Solids by weight: 48.02%  
  Solids by volume: 30.06%  
  Maximum VOC (g/l): 350  
  Typical Thickness - Wet (mils) 5.0  
  Dry (mils)  1.5  
  Typical Coverage (sq. ft./gal) 300-350  
  Dry Time (77°F. / 55% R H)  
  Set to Touch (hr.) 1/2-1  
  Recoat (hr.) 4  
  Through Dry (hr.) 18  
  Gloss (60° angle) 3-5  
   
  PERFORMANCE TESTING RESULTS:  
           
  TEST RESULTS  
           
  Hide
(ASTM D 2805)
95.03  
           
    Sag Resistance
(ASTM D 4400)
  12 +  
           
  Adhesion (Tape Test) **
(ASTM D 3395)
5B  
           
  Freeze-Thaw Stability
(ASTM D 2243)
Pass
(3 cycles)
 
           
  Heat Stability
(ASTM D 1849)
Pass
(No change 3 week @ 120°F)
  
       
    Enamel Hold Out)
Excellent
  
       
  * On a scale from 1-10 (10 = Best, 0 = Poor).  
  ** On a scale from 0B-5B (5B = 0% area removed, 0B = Greater than 65% area is removed).  
           
           
           
  Note: To the best or our knowledge, the information contained herein is accurate. However, Betanix® assumes no liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of the suitability of any information or material for the use contemplated, the manner of use and whether there is any infringement of patents is the sole responsibility of the user. Additional information may be obtained thorough your local sales representative or the Betanix Sales Office.  
 
(back)
  
Owner Of Intellectual Properties © 1995-2011 Beta Technology Licenses UK Ltd., Betanix® UK Ltd. All Rights Reserved.
London   •  New York  •  Luxembourg